Inconel 601 Washers
Inconel 601 Flat Washers, Inconel 601 Industrial Washers, Alloy 601 Washers, Inconel Alloy 601 Washers, Suppliers of Inconel 601 Washers, Alloy 601 Star Washers, 601 Inconel Spring Washers At Factory Price In India.
Vintex Steel & Engg. Co. is a recognized manufacturer and seller of Inconel 601 Washers, which are broadly considerably utilized in hovering temperature conditions.
For excessive temperature carrier (above one thousand Degree F), there may be no benefit in using Washers in comparison to different alloys. There can be some conditions in which gadget can see each extended temperature carrier and low aqueous corrosion problems in which a stabilized grade is warranted. Inconel UNS N06601 Split Washers is regularly utilized in Pulp and Paper Equipment, Heat exchangers, Propeller shafts, Fittings, Dyeing Equipment, Exterior Architectural additives in Marine Coastal Areas. It supply a higher weldability, and as properly decreases the view of an inferior corrosion resistance across the regions of welded. It varies through having decrease carbon content, together with a piece lesser yield and tensile strengths.
Alloy 601 Washers Manufacturer India, Nickel Alloy 601 Fender Washer Supplier, UNS N06601 Washers, Inconel Alloy 601 Dome Washers, Inconel 601 Square Washer Stockist, 2.4851 Ogee Washers, Alloy 601 Lock Washers, Inconel 601 Belleville Washers, Alloy 601 Split Washer, Inconel® Alloy 601 Machine Washer Manufacturer In India.
- Material Specification Chart Of Inconel 601 Washers
- Inconel 601 Washers Equivalent Grade
- Most Commonly used Inconel 601 Washers Types
- Size Chart Of Inconel 601 Washers
- Dimensions of Alloy 601 Spring Washer
- Dimensions of Alloy 601 Flat Washer
- Weight Chart Of Inconel Alloy 601 Washers
- Stock List Of Inconel 601 Washers
- Chemical Composition of Inconel 601 Washers
- Mechanical Properties of Inconel 601 Washers
- Inconel 601 Washers Uses and Application
- Inconel 601 Washers Export Countries
It may be provided in cut-to duration sizes and as properly fabricated or machined to satisfy up your custom designed piping requirements. It may be hardened through operating, which also can bring about accelerated strength. Most not unusual place operating operations which include shearing, drawing and stamping may be done on Inconel WNR 2.4851 Slot Washers, that are utilized in Chemical processing, Springs, Fasteners, Thread inserts, and Wire mesh. Meanwhile, publish paintings annealing in Washers need to be finished to cast off inner stresses. It is an advanced version, with the addition of molybdenum and barely better nickel content.
The resultant composition of Nickel-Alloy 601 Machine Washers offers the metallic plenty accelerated corrosion resistance in lots of competitive environments. The molybdenum makes Washers extra proof against pitting and crevice corrosion in chloride-infected media, sea water and acetic acid vapours. The decrease fee of well-known corrosion in mildly corrosive environments offers Washers proper atmospheric corrosion resistance in polluted marine atmospheres. Typical packages of Washers include: Food practice gadget specifically in chloride environments, Fasteners, Pharmaceuticals, Marine packages, etc. It is likewise utilized in Architectural packages, and Medical implants which contain pins, screws and orthopedic implants like overall hip and knee replacements. Industries predominantly using Washers are Chemical processing, Oil and gas, High Performance, Commercial, and so on.
Material Specification Chart Of Inconel 601 Washers
| Specification | ASTM B166 / ASME SB166 |
|---|---|
| Size | M02 to M33, Custom Sizes |
| Length | 3 mm to 200 mm |
| Washer | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Washers | DIN 125A, DIN 125B, DIN 127B, DIN 137B, DIN 6797A, DIN 6797J, ISO 7089, DIN 7980, DIN 127 B, IS 2016, ASTM F436M, ASME B18.13, ASME B18.21.1, ASME B18.22.1, ASME B18.23.1 |
| Form of Washers | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Popular Types of Washer | Star Washer, Flat Washer, Lock Washer, Slot Washer, Machine Washer, Sealing Washer, Split Washer, Dome Tooth Washer, Countersunk Washer, Tab Washers, Spherical Washer, Square Washer, Spring Washer, Round Washers, Square Washers etc. |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Washers | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Washers | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
| Packing of Washers | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating | Ptfe Coated Washers Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Washers finishing | Coatings & Finishes : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Inconel 601 Washers Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
Most Commonly used Inconel 601 Washers Types
Inconel 601 Flat Washer
- UNS N06601 Thin Flat Washer
- Inconel Alloy 601 Plain Washer
- 2.4851 3 Inch Flat Washer
- Inconel 601 Thick Flat Washer
- Alloy 601 Flat Washer
- Alloy 601 Knurled Flat Washer
Inconel 601 Dock Washer
- UNS N06601 Thin Dock Washer
- Inconel 601 Flat Dock Washer
- Alloy 601 Square Dock Washer
- Alloy 601 Dock Washer
- 2.4851 Dock Washers
- Inconel Alloy 601 Dock Washer
- UNS N06601 Thick Dock Washer
Inconel 601 Ogee Washer
- Alloy 601 Ogee Washer
- Inconel 601 Thick Ogee Washer
- UNS N06601 Thin Ogee Washer
- 2.4851 Ogee Washer
- Inconel Alloy 601 Ogee Washer
Inconel 601 Spring Washer
- Alloy 601 Helical Spring Washer
- UNS N06601 Wave Spring Washer
- 2.4851 Spring Washers
- Alloy 601 Spring Washer
- Inconel Alloy 601 Flat Spring Washer
Inconel 601 Square Washer
- Alloy 601 Square Hole Washers
- Alloy 601 Square Washer
- Inconel Alloy 601 Large Square Washer
- 2.4851 Square Washer
- UNS N06601 Square Lock Washer
- Inconel 601 Flat Square Washer
Inconel 601 Lock Washer
- Alloy 601 Heavy Duty Lock Washers
- UNS N06601 Internal Tooth Lock Washer
- Inconel 601 Split Lock Washer
- 2.4851 Lock Washer
- Inconel Alloy 601 Lock Washer
- Alloy 601 Lock Washer
Inconel 601 Star Washer
- Inconel 601 Internal Star Washer
- 601 Inconel Star Spring Washer
- UNS N06601 External Star Washer
- Alloy 601 Star Spring Washer
- 2.4851 Internal Star Washer
- Alloy 601 Star Washer
- Inconel Alloy 601 Star Washer
Inconel 601 Fender Washer
- 2.4851 Fender Washer Alloy 601 Heavy Duty Fender Washer
- UNS N06601 Fender Washer
- Alloy 601 Fender Washer
- Inconel 601 Spring Steel Fender Washer
- Inconel Alloy 601 Standard Fender Washer
Inconel 601 Belleville Washer
- Alloy 601 Belleville Washer
- UNS N06601 Belleville Washer
- 601 Inconel Belleville Wave Spring Washer
- Inconel 601 Belleville Disc Washer
- Inconel 601 Belleville Disc Spring Washer
- 2.4851 Belleville Washer
Inconel 601 Countersunk Finishing Washer
- Alloy 601 Countersunk Finishing Washer
- Inconel Alloy 601 Countersunk Finishing Washer
- UNS N06601 Countersunk Finishing Washer
- 2.4851 Countersunk Finishing Washer
- Alloy 601 Countersunk Finishing Washer
- Inconel 601 Counter Sunk Finishing Washer
Inconel 601 Split Washer
- Inconel 601 Split Ring Washer
- 601 Inconel Split Ring Washer
- UNS N06601 Split Washer
- Inconel 601 Split Lock Washer
- Alloy 601 Split Washer
- Inconel Alloy 601 Split Washer
- 2.4851 Split Lock Washer
Inconel 601 Spherical Washer
- UNS N06601 Spherical Washer
- Alloy 601 Spherical Washer
- 2.4851 Spherical Washer
- 601 Inconel Spherical Washer
- Inconel Alloy 601 Spherical Washer
We are One Of The Most Trusted Supplier Of Inconel 601 Washer in India. For final Alloy 601 Washers Price List. Please Call on +91 22 6636 2645 or drop an E-Mail : sales@vintexsteel.com
Other Related Products
Size Chart Of Inconel 601 Washers
| Size | USS | SAE | ||||
|---|---|---|---|---|---|---|
| Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
|
| #2 | – | – | – | 3/32″ | 1/4″ | 0.020″ |
| #4 | – | – | – | 1/8″ | 5/16″ | 0.032″ |
| #6 | – | – | – | 5/32″ | 3/8″ | 0.049″ |
| #8 | – | – | – | 3/16″ | 7/16″ | 0.049″ |
| #10 | – | – | – | 7/32″ | 1/2″ | 0.049″ |
| #12 | – | – | – | 1/4″ | 9/16″ | 0.065″ |
| 1/4″ | 5/16″ | 0.734″ | 0.065″ | 9/32″ | 5/8″ | 0.065″ |
| 5/16″ | 3/8″ | 7/8″ | 0.083″ | 11/32″ | 11/16″ | 0.065″ |
| 3/8″ | 7/16″ | 1″ | 0.083″ | 13/32″ | 13/16″ | 0.065″ |
| 7/16″ | 1/2″ | 1-1/4″ | 0.083″ | 15/32″ | 15/16″ | 0.065″ |
| 1/2″ | 9/16″ | 1-3/8″ | 0.109″ | 17/32″ | 1-1/16″ | 0.095″ |
| 9/16″ | 5/8″ | 1-15/32″ | 0.109″ | 19/32″ | 1-5/32″ | 0.095″ |
| 5/8″ | 11/16″ | 1-3/4″ | 0.134″ | 21/32″ | 1-5/16″ | 0.095″ |
| 3/4″ | 13/16″ | 2″ | 0.148″ | 13/16″ | 1-15/32″ | 0.134″ |
| 7/8″ | 15/16″ | 2-1/4″ | 0.165″ | 15/16″ | 1-3/4″ | 0.134″ |
| 1″ | 1-1/16″ | 2-1/2″ | 0.165″ | 1-1/16″ | 2″ | 0.134″ |
| 1-1/8″ | 1-1/4″ | 2-3/4″ | 0.165″ | – | – | – |
| 1-1/4″ | 1-3/8″ | 3″ | 0.165″ | – | – | – |
| 1-3/8″ | 1-1/2″ | 3-1/4″ | 0.180″ | – | – | – |
| 1-1/2″ | 1-5/8″ | 3-1/2″ | 0.180″ | – | – | – |
| 1-5/8″ | 1-3/4″ | 3-3/4″ | 0.180″ | – | – | – |
| 1-3/4″ | 1-7/8″ | 4″ | 0.180″ | – | – | – |
| 2″ | 2-1/8″ | 4-1/2″ | 0.213″ | – | – | – |
Dimensions of Alloy 601 Spring Washer
| NOM SIZE | Inner Dia (d) Basic Tol (+) | Outer Dia (d1) Max | WIDTH (b) Basic Tol (+ or -) | THICKNESS (S) Basic Tol (+ or -) | Weight per 1000 in Kgs | |||
| 3 | 3.1 | 0.3 | 6.2 | 1.3 | 0.1 | 0.8 | 0.1 | 0.11 |
| 4 | 4.1 | 0.3 | 7.6 | 1.5 | 0.1 | 0.9 | 0.1 | 0.18 |
| 5 | 5.1 | 0.3 | 9.2 | 1.8 | 0.1 | 1.2 | 0.1 | 0.36 |
| 6 | 6.1 | 0.4 | 11.8 | 2.5 | 0.15 | 1.6 | 0.1 | 0.83 |
| 8 | 8.1 | 0.4 | 14.8 | 3 | 0.15 | 2 | 0.1 | 1.60 |
| 10 | 10.2 | 0.5 | 18.1 | 3.5 | 0.2 | 2.2 | 0.15 | 2.53 |
| 12 | 12.2 | 0.5 | 21.1 | 4 | 0.2 | 2.5 | 0.15 | 3.82 |
| 14 | 14.2 | 0.5 | 24.1 | 4.5 | 0.2 | 3 | 0.15 | 6.01 |
| 16 | 16.2 | 0.8 | 27.4 | 5 | 0.2 | 3.5 | 0.2 | 8.91 |
| 18 | 18.2 | 0.8 | 29.4 | 5 | 0.2 | 3.5 | 0.2 | 9.73 |
| 20 | 20.2 | 1 | 33.6 | 6 | 0.2 | 4 | 0.2 | 15.20 |
| 22 | 22.5 | 1 | 35.9 | 6 | 0.2 | 4 | 0.2 | 16.50 |
| 24 | 24.5 | 1 | 40 | 7 | 0.25 | 5 | 0.2 | 26.20 |
| 27 | 27.5 | 1 | 43 | 7 | 0.25 | 5 | 0.2 | 28.70 |
| 30 | 30.5 | 1.2 | 48.2 | 8 | 0.25 | 6 | 0.2 | 44.30 |
| 33 | 33.5 | 1.2 | 55.2 | 10 | 0.25 | 6 | 0.2 | 63.00 |
| 36 | 36.5 | 1.2 | 58.2 | 10 | 0.25 | 6 | 0.2 | 67.30 |
| 39 | 39.5 | 1.2 | 61.2 | 10 | 0.25 | 6 | 0.2 | 71.70 |
| 42 | 42.5 | 1.2 | 68.2 | 12 | 0.25 | 7 | 0.25 | 111.00 |
| 45 | 45.5 | 1.2 | 71.2 | 12 | 0.25 | 7 | 0.25 | 117.00 |
| 48 | 49 | 1.5 | 75 | 12 | 0.25 | 7 | 0.25 | 123.00 |
| 52 | 53 | 1.5 | 83 | 14 | 0.25 | 8 | 0.25 | 320.00 |
Dimensions of Alloy 601 Flat Washer
| Bolt Size | USS | SAE | ||||
| OD (in.) | ID (in.) | Thickness | OD (in.) | ID (in.) | Thickness | |
| 1/8 (#6) | – | – | – | 0.375 | 0.156 | .036/.065 |
| 5/32 (#8) | – | – | – | 0.438 | 0.188 | .036/.065 |
| 3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 7/32 (#12) | – | – | – | 0.562 | 0.250 | .051/.080 |
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
| 1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | – | – | – |
| 1 3/4 | 4.000 | 1.875 | .153/.213 | – | – | – |
| 1 7/8 | 4.250 | 2.000 | .153/.213 | – | – | – |
| 2 | 4.500 | 2.125 | .153/.213 | – | – | – |
| 2 1/4 | 4.750 | 2.375 | .320/.248 | – | – | – |
| 2 1/2 | 5.000 | 2.625 | .210/.280 | – | – | – |
| 2 3/4 | 5.250 | 2.875 | .228/.410S | – | – | – |
| 3 | 5.500 | 3.125 | .249/.327 | – | – | – |
Weight Chart Of Inconel Alloy 601 Washers
| APPROX. WEIGHT IN KGS FOR 100 NOS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE | TAPER | WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
| M-3 | 0.01 | 0.01 | |||||||||
| M-4 | 0.02 | 0.02 | |||||||||
| M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
| M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
| M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
| M-14 | 0.82 | 0.60 | 0.38 | ||||||||
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
| M-18 | 1.27 | 0.97 | 0.66 | ||||||||
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
| M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
| M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
| M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
| M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
| M-52 | 31.90 | 33.00 | 18.20 | ||||||||
| M-56 | 47.90 | 19.30 | |||||||||
| M-60 | 51.60 | 20.30 | |||||||||
| M-64 | 55.40 | 21.80 | |||||||||
| M-68 | 57.40 | ||||||||||
| M-72 | 63.40 | 24.00 | |||||||||
Test Certificates Of Inconel 601 Washers
- Mill Test Report
- Raw Materials Certificate
- EN 10204/3.1B
- Third Party Inspection Report
- 100% Radiography Test Report
Chemical Composition of Inconel 601 Washers
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 601 | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
Mechanical Properties of Inconel 601 Washers
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Inconel 601 Washers Uses and Application
- Nuclear Energy Sector
- Offshore & Chemical Industry
- Engineering & Aerospace Industry
- Automotive industry
- Oil & Gas Industries
- Power Generation
- Architectural Trim and Molding
- Kitchen Benches, Sinks, Equipment
- Food Processing Equipment
Inconel 601 Washers Export Countries
United Arab Emirates, Iran, Estonia, Bhutan, Greece, Libya, Algeria, Angola, Netherlands, South Africa, Austria, Peru, Malaysia, Costa Rica, Jordan, Chile, Poland, Argentina, Pakistan, Croatia, Serbia, Azerbaijan, Russia, Philippines, Lithuania, New Zealand, Egypt, Sri Lanka, Kazakhstan, Poland, Mongolia, Thailand, Iran, Norway, Saudi Arabia, Kenya, France, Vietnam, Ukraine, Hong Kong, Morocco, United States, Belarus, Mexico, Afghanistan, Yemen, Brazil, Colombia, Singapore, Nigeria, Italy, Spain, Indonesia, Mexico, Hungary, Romania, Ghana, Australia, Qatar, Taiwan, Switzerland, Bangladesh, Bahrain, Slovakia, China, Turkey, Oman, Trinidad & Tobago,Tunisia, Sweden, Ecuador, Denmark, Nigeria, Venezuela, India, Canada, Belgium, Finland, United Kingdom, Portugal, South Korea, Bulgaria, Kuwait, Iraq, Lebanon, Czech Republic, Japan, Chile, Gabon, Bolivia, Israel.