DIN Fasteners

DIN Fasteners, DIN Stud Bolts, DIN 933 Bolts, DIN Standard Screws, Suppliers of DIN Nuts, DIN 934 Hex Nuts, Stainless Steel Fasteners DIN Standard At Factory Price In India.

DIN Fasteners

Vintex Steel & Engg. Co. is one of the prominent seller of DIN Fasteners, which may be fabricated the use of the equal strategies as are used for different alloys.

Furthermore, it’s miles very proof against sulphide pressure cracking and pressure corrosion cracking in sour, oilfield environments. Although there are numerous versions of the nickel alloy, it’s miles with the aid of using some ways the maximum extensively used. It has exquisite resistance to pitting, crevice corrosion, and pressure corrosion cracking. DIN Nuts well-known shows exceptional resistance to each oxidizing and decreasing acid environments in addition to the ones containing blended acids. Wide sorts of industries depend on Fasteners for some of unique packages, which includes: Pesticide production, Sour fueloline services, Pollution control, and Waste incinerators.

DIN Threaded Rod Supplier, DIN 913 Socket Set Screw, DIN Pins, DIN Standard Bolts, DIN 603 Carriage Bolt, DIN Machine Screw Stockist, DIN 835 Double Ended Studs, DIN 529 D Anchor Bolts Manufacturer In India.

Table of Content

It did now no longer go through localized assault at ninety-five Degree C within the liquid segment or at ninety Degree C within side the vapour segment. DIN Bolts shows very excessive resistance to chloride – precipitated pitting and crevice assault, varieties of corrosion to which the austenitic stainless steels are specifically prone. It has exquisite resistance to each decreasing and oxidizing media, and additionally exceptional resistance to oxidizing aqueous media. It is a completely austenitic superior corrosion – resistant alloy that gives resistance to each aqueous corrosion and assault at multiplied temperatures.

DIN Washers additionally has exquisite resistance to localized corrosion and exceptional resistance to pressure corrosion cracking, great alloy to apply as a normal weld filler metallic to face up to corrosion of weldments. It need to additionally now no longer be utilized in packages which includes moist chloride or hypochlorite bleach. It has a unique chemistry designed to acquire a degree of thermal balance substantially advanced to that of its predecessors. It withstands moist HCl fueloline, sulphuric, acetic and phosphoric acids, and has exceptional resistance to pitting and to pressure corrosion cracking. Therefore, if Fasteners is used alongside iron or copper piping in a machine containing hydrochloric acid, the presence of those salts ought to motive the alloy to fail prematurely. It may be warm-laboured the use of all not unusual place warm operating procedures.

Material Specification Chart Of DIN Fasteners

Size M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160
Length 3 mm to 200 mm
Threads METRIC, BSW, BSF, UNC, UNF or as required
Standard ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • ASME B18.2.2
  • ASME B18.5
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards
In Form of Hex, Square, Round, Threading as per Gauge Etc.
Head drive Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Surface finishing Zinc (yellow, white, blue, black), black oxide, Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Production process M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element
Surface Coating
  • Teflon Coated Fasteners
  • Phosphate Coated Fasteners
  • Zinc Coated Fasteners
  • Ptfe Coated
  • Xylon Coated Fasteners
  • Cadmium Coated Fasteners
  • Hot Dipped Galvanizing Coated Fasteners
All surface finishes offered including Geomet & PTFE, Galvanised, Zinc, Electroless Nickel, Sherardized, Dacromet
Packing IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request

Most Commonly used DIN Fasteners Types

Bolts
DIN Bolts

  • DIN Hex Head Bolt
  • DIN Eye Bolts
  • DIN 603 Carriage Bolts
  • DIN Square Bolts
  • DIN 933 Bolt
  • DIN Standard Flange Bolts
  • DIN 931 Bolts

DIN Screw

  • DIN 316 Wing Screws
  • DIN Machine Screw
  • DIN 7991 Socket Head Cap Screws
  • DIN 551 Slotted Set Screws
  • DIN Allen Cap Screws
  • DIN Standard Self Tapping Screw
  • DIN Screw

Heavy Hex Nuts
DIN Nuts

  • DIN Coupling Nuts
  • DIN Nuts
  • DIN Dome Nuts
  • DIN 934 Hex Nuts
  • DIN 315 Wing Nuts
  • DIN 557 Square Nuts
  • DIN Heavy Hex Nuts

DIN Stud Bolts

  • DIN 986 Stud Bolts
  • DIN 835 Double Ended Stud Bolts
  • DIN 939 Tap End Stud Bolt
  • DIN 976 Stud Bolts
  • DIN Half Threaded Stud Bolt
  • DIN Standard Tie Rods

DIN Washer

  • DIN 137 Spring Washer
  • DIN Ogee Washer
  • DIN Washers
  • DIN 125 Flat Washer
  • DIN 127 Split Washer
  • DIN Plain Washer
  • DIN 436 Square Washer

Anchor Bolt
DIN Anchor Bolts

  • DIN Sleeve Anchor Bolts
  • DIN J Anchor Bolts
  • DIN Wedge Anchor Bolt
  • DIN Self Tapping Anchor
  • DIN Anchor Bolt
  • DIN Standard Anchor Bolt
  • DIN Concrete Anchor

Threaded Rod
DIN Threaded Rod

  • DIN Standard Threaded Rod
  • DIN Partially Threaded Rods
  • DIN Acme Threaded Rods
  • DIN 975 Full Threaded Rods
  • DIN Heavy Threaded Rods
  • DIN Half Threaded Rods
  • DIN Trapezoidal Threaded Rod

Stud
DIN Stud

  • DIN 939 Stud
  • DIN 835 Double Ended Stud
  • DIN Flush Head Studs
  • DIN Standard Studs
  • DIN Full Thread Stud
  • DIN 976 Studs

DIN Fasteners Standards

DIN 1-100

DIN 1 – Taper Pins
DIN 7 – Dowel Pins
DIN 84 A – Slotted Cheese Head Machine Screws
DIN 85 A – Slotted Pan Head Machine Screws
DIN 93 – Tab Washers With Long Tab
DIN 94 – Cotter Pins
DIN 95 – Slotted Oval Head Machine Screws
DIN 96 – Slotted Round Head Wood Screws
DIN 97 – Slotted Flat Head Wood Screws

DIN 101-200

DIN 125 A – Flat Washer Without Chamfer
DIN 125 B – Flat Washer With Chamfer
DIN 126 – Grade C Flat Washer Without Chamfer
DIN 127 A – Split Lock Washer With Bend Ends
DIN 127 B – Split Lock Washer With Flat Ends
DIN 128 A – Split Spring Washers, Curved
DIN 128 B – Split Spring Washers, Waved
DIN 137 A – Spring Washer, Curved
DIN 137 B – Spring Washer, Waved
DIN 186 A – Tee-Head Bolts With Square Head
DIN 188 – Tee-Head Bolts With Double Nip
DIN 193
DIN 196

DIN 301-400

DIN 315 – Wing Nuts
DIN 316 – Wing Screws

DIN 401-500

DIN 404 – Slotted Drilled Fillister Head Screws
DIN 417 – Slotted set screws with full dog point
DIN 427 – Slotted Headless Screws
DIN 431 – Jam Nut, Hexagonal
DIN 432 – External Tab Washer
DIN 433 – Flat Washer With Reduced O.D.
DIN 434 – Square Bevel Washer: 8%
DIN 435 – Square Bevel Washer: 14%
DIN 436 – Square Washer
DIN 438 – Slotted set screws with cup point
DIN 439 A – Hexagon Nuts – 0,5d Unchamfered
DIN 439 B – Hexagon Nuts – 0,5d Chamfered
DIN 444 A – Eye Bolts
DIN 462 – Internal Tab Washers
DIN 463 – Tab Washers With Long And Short Tab
DIN 464 – Knurled Thumb Screws
DIN 466 – Knurled Nuts, Full
DIN 467 – Flat Knurled Nuts
DIN 470 – Sealing Washers
DIN 471 – External Retaining Rings
DIN 472 – Internal Retaining Rings
DIN 478 – Square Head Bolts
DIN 479 – Square Head Bolts
DIN 480 – Square Head Bolts

DIN 501-600

DIN 525 – Weld Studs With Hexagon Nuts
DIN 529 A – Anchor Bolts (Stone Bolt)
DIN 529 B – Anchor Bolts (Stone Bolt)
DIN 529 C – Masonry Bolts With Hexagon Nuts
DIN 529 D – Anchor Bolts (Stone Bolt)
DIN 529 E – Foundation Bolts With Hexagon Nuts
DIN 529 F – Anchor Bolts (Stone Bolt)
DIN 529 G Bolt
Din 546 – Slotted Round Nut
DIN 547 – Round nuts with drilled holes in one face
DIN 548 – Round nuts with set pin holes in side
DIN 551 – Slotted Set Screws With Flat Point
DIN 553 – Slotted Set Screws With Cone Point
DIN 555 – Hexagon Nuts – 0,8d
DIN 557 – Square Nuts
DIN 558 – Fully Threaded Maching Bolts
DIN 562 – Square Thin Nuts
DIN 571 – Hexagon Lag Screws
DIN 580 – Lifting Eye Bolts
DIN 582 – Lifting Eye Nuts

DIN 601-700

DIN 601- Hexagon head bolt with nut
DIN 603 – Carriage Bolts With Hexagon Nuts
DIN 604 – Flat Countersunk Nip Bolts With Hex Nuts
DIN 605 – Flat Countersunk Square Neck Bolts
DIN 607 – Round Head Nip Bolts With Nuts
DIN 608 – Countersunk Square Bolts (Short Neck)
DIN 609 – Hex Fitting Bolts w/long Threaded Portion
DIN 610 – Hex fitting Bolts w/short Threaded Portion
DIN 653 – Flat Knurled Thumb Screws
DIN 660 – Round Head Rivets
DIN 661 – Countersunk Head Rivets

DIN 701-800

DIN 705 A – Shaft Collars

DIN 801-900

DIN 835 Fo – Studs, Tap Ends – 2d

DIN901-1000

DIN 906 – Hexagon Socket Pipe Plugs
DIN 908 – Hexagon Socket Screw Plugs
DIN 910 – Hexagon Head Screw Plugs
DIN 911 – Hexagon Socket Screw Keys
DIN 912 – Socket Head Cap Screws
DIN 913 – Socket Set Screws With Flat Point
DIN 914 – Socket Set Screws With Cone Point
DIN 915 – Socket Set Screws With Dog Point
DIN 916 – Socket Set Screws With Cup Point
DIN 917 – Hexagon Cup Nuts – Low Pattern
DIN 920 – Slotted Pan Head Screws, Small Head
DIN 921 – Slotted pan head screws with large head
DIN 923 – Slotted Pan Head Screws With Shoulder
DIN 927 – Slotted Shoulder Screws
DIN 928 – Square Weld Nuts
DIN 929 – Hexagon Weld Nuts
DIN 931 – Hexagon Cap Screws Partially Threaded
DIN 933 – Hexagon Cap Screws Fully Threaded
DIN 933 Sz – Hexagon Cap Screws With Slot
DIN 934 – Hexagon Nuts – 0,8d
DIN 935 – Castle Nuts
DIN 936 – Hexagon Jam Nuts
DIN 937 – Hexagon Thin Slotted And Castle Nuts
DIN 938 – Studs – Metal end ≈ 1 d.htm
DIN 939 – Studs, Tap End – 1,25d
DIN 960 – Hex Cap Screws, Metric Fine Thread – Part Thread
DIN 961 – Hex Cap Screws, Metric Fine Thread – Full Thread
DIN 963 A- Slotted Flat Head Machine Screws
DIN 964 A- Slotted Oval Head Machine Screws
DIN 965 A – Cross Recessed Flat Head Machine Screws
DIN 966 A – Cross Recessed Oval Head Machine Screws
DIN 980 V – Self-Locking Nuts; All Metal Conctruction
DIN 982 – Self- Locking Nuts w/nylon Insert: Heavy Series
DIN 985 – Self Locking Nuts w/locking Insert: Standard Series
DIN 986 – Self Locking Domed Cap Nuts With Nylon Insert
DIN 988 – Shim Washers

DIN 1001-2000

DIN 1052
DIN 1440 – Flat Washers With Clevis Pins, Medium
DIN 1441 – Flat Washers For Clevis Pins, Coarse
DIN 1473 – Grooved Pins Full Length Paralled Grooved
DIN 1475 – Grooved Pins Third Length Center Grooved
DIN 1476 – Round Head Grooved Pins
DIN 1477 – Flat Countersunk Head Grooved Pins
DIN 1480 – Turnbuckles
DIN 1481 – Spring Ppins, Heavy Duty
DIN 1587 – Hexagon Domed Cap Nuts, Full Pattern
DIN 1804 w – Slotted Round Nuts

DIN 2001-3000

DIN 2093 A,B,C – Dics Springs (Belleville Type)
DIN 2338 – Parallel Pin
DIN 2339
DIN 2509 – Double end studs
DIN 2510

DIN 3001-3999

DIN 3570 – U Bows U Bolts

DIN 6001-7000

DIN 6319 – C D G Spherical washers and conical seats
DIN 6325 – Parallel Pins Hardened
DIN 6332 – Grub screws with thrust point
DIN 6334 – Hexagon Nuts – 3d
DIN 6796 – Conical Spring Washers (Belleville Type)
DIN 6797 A+J – Internal/External Tooth Lock Washers
DIN 6797 AZ – Tooth Lock Washers (Type AZ)
DIN 6798 A+J – Serrated Lock Washers
DIN 6798 AZV – Serrated Lock Washers (type AZV)
DIN 6798 V – 90degree Countersunk Serrated Lock Washers
DIN 6799 – Circlips For Shafts
DIN 6885 A – Parallel Keys, Round Ended
DIN 6885 B – Parallel Keys, Square Ended
DIN 6911 – Hexagon Socket Screw Keys With Pilot
DIN 6912 – Low Head Socket Cap Screws With Pilot
DIN 6914 – Hex Bolts For High Strength Struct. Bolting
DIN 6915 – Hex Nuts For High Strength Struc. Bolting
DIN 6916 – Washers For High Strength Structural Bolting
DIN 6917 – Square taper washer for -sections 14%
DIN 6918 – Square taper washer for U-sections
DIN 6921 – Hex Flange Bolts
DIN EN 1665 Hexagon bolts with flange – heavy series(Replace DIN 6922)
DIN 6923 – Hexagonal Flange Nuts
DIN 6924 Prevailing torque type hexagon nut with nylon insert ISO 7040
DIN 6925 – Prevailing torque type hexagon nut all metal
DIN 6926 – Self-Locking Hex Flange Nuts: Non Metallic Insert
DIN EN 1663 – Prevailing torque type hexagon nuts with flange with non-metallic insert

DIN 7001-8000

DIN 7338 – Rivets for brake linings and clutch linings
DIN 7343 – Coiled Pins, Medium Duty
DIN 7349 – Flat Washers With Large Ext. Diameter
DIN 7500AE – Slotted cheese head thread rolling screws
DIN 7500BE – Slotted pan head thread rolling screws
DIN 7500C – Metric pan head triangle lock screws
DIN 7500CE – Cross recessed pan head thread rolling screws
DIN 7500DE – Hexagon head thread rolling screws
DIN 7500E – Socket hexagon cheese head thread rolling screws
DIN 7500KE – Slotted rasied countersunk thread rolling screws
DIN 7500LE – Slotted rasied countersunk thread rolling screws
DIN 7500ME – Cross recessed countersunk head thread rolling screws
DIN 7500NE – Cross recessed raised countersunk head thread rolling screws
DIN 7500OE – Hexalobular socket cheese head thread rolling screws
DIN 7500PE – Hexalobular socket pan head thread rolling screws
DIN 7500QE – Hexalobular socket raised countersunk head thread rolling screws
DIN 7504 – N P K head self drilling screws
DIN 7968 – Hexagon fit bolts with hexagon nut for steel structures
DIN 7969 – Slotted countersunk head bolts with hexagon nut for steel structures
DIN 7970 – Tapping screw threads
DIN 7978 A – Taper PIns With Internal Thread
DIN 7979 D – Dowel Pins With Internal Thread
DIN 7980 – Hi-Collar Lock Washers
DIN 7981 B(BZ) – Cross Recessed Pan Head Tapping Screws
DIN 7982 B – Cross Rec. Flat hd Tapping Screws, hd Angle 80
DIN 7983 B – Cross Rec. Oval hd Tapping Screw, hd Angle 80
DIN 7984 – Socket Low Head Cap Screws
DIN 7985 A – Cross Recessed Pan Head Machine Screws
DIN 7985 Z1 – Cr. Rec. Pan Head Screws w/captive Flt. Washer
DIN 7985 Z4 – Cr. Rec. Pan Head Screws w/captive l/washer
DIN 7989 A – Washers For Steel Constructions
DIN 7991 – Flat Socket Head Cap Screws
DIN 7997 – Cross recessed countersunk head wood screws
DIN 7998 – Threads and Thread Ends for Wood Screws

DIN 9001-9999

DIN 9021
DIN 9250 Safety lock serrate washer
DIN EN 22339 – Unhardened Taper Pins (Replace DIN 1)

We are One Of The Most Trusted Supplier Of DIN Fasteners in India. For final DIN Standard Fasteners Price List. Please Call on +91 22 6636 2645 or drop an E-Mail : sales@vintexsteel.com

Other Related Products

Test Certificates Of DIN Standard Fasteners

  • Mill Test Report
  • Raw Materials Certificate
  • EN 10204/3.1B
  • Third Party Inspection Report
  • 100% Radiography Test Report

DIN Standard Fasteners Uses and Application

  • Nuclear Energy Sector
  • Offshore & Chemical Industry
  • Engineering & Aerospace Industry
  • Automotive industry
  • Oil & Gas Industries
  • Power Generation
  • Architectural Trim and Molding
  • Kitchen Benches, Sinks, Equipment
  • Food Processing Equipment
application
application1
application2
application3
application4
Previous
Next

DIN Fasteners Export Countries

Brazil, Belarus, Yemen, Malaysia, Bahrain, Sweden, China, Mexico, Algeria, Bangladesh, Bulgaria, Iran, Czech Republic, Poland, France, Estonia, Russia, Switzerland, Taiwan, Thailand, New Zealand, Trinidad & Tobago,Tunisia, Pakistan, Chile, South Africa, Saudi Arabia, Kenya, Lebanon, Angola, Chile, Turkey, India, Slovakia, Finland, Sri Lanka, Australia, Gabon, Mexico, Azerbaijan, Egypt, Costa Rica, Qatar, Jordan, Venezuela, Argentina, Mongolia, Spain, Ecuador, Portugal, Iran, Vietnam, Iraq, United Kingdom, Bolivia, Romania, Canada, Poland, Hungary, Indonesia, Ukraine, Japan, United Arab Emirates, Serbia, Lithuania, Belgium, Netherlands, Peru, Denmark, Ghana, Singapore, Kuwait, Nigeria, Philippines, Nigeria, Norway, Colombia, United States, Austria, Kazakhstan, Israel, Italy, Morocco, Libya, Oman, Afghanistan, Greece, Hong Kong, Bhutan, South Korea, Croatia.
SS Special Grades
Fasteners
Product Categories
Have Any Questions ? Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.
Contact Us
Buy DIN Fasteners and DIN Standard Bolt, Screw At Factory Price In India
Contact Now